|Content||Meca System Linkage Guard.
The PEHD construction combines lightweight with high-strength to give maximum protection to the bottom of the shock absorber and linkage components. Made from high density polyethylene.
Fits all adult sized TM Racing machines from 2011>2021
Supplied with hardware for quick and easy fitting.
T-2248PE||BZERK seat support available for TM Racing 4-Stroke machines (250Fi/300Fi/450Fi/530Fi) models from 2015-2021.
This seat support bracket rivets to the original plastic seat base (seat cover removed first) to strengthen and support the seat, to reduce 'compression' of the seat itself and the resulting 'widening' of the seat on the corner areas. The 4-stroke variant does not feature a 'centre' support like the 2-stroke version, this unnecessary with the 4-stroke bike design and the air intake at the front of the chassis as the airbox is the 'support'.
The BZERK seat support has been designed to reduce the flex in the seat base under certain loads, loads that can deform the shape and structure of the seat. The deformation of the seat base that can allow the sides of the seat to be exposed from the confines of the body panels. This exposure occurs where the radiator panel and side number panel area meet and the aesthetic angle is changed on the seat itself to mirror the contours of the bodywork - the seat 'widens' under deformation, thus causing snagging and damage to seat covers in the 'corner' area by boots tops and knee braces.
This seat support bracket is made from aluminium and comes with rivets for fitting. This simple yet effective part will reduce unwanted flex and deformation helping to keep your seat covers looking better, for longer.
See the images of the BZERK seat support to understand how it works.
AVAILABLE IN NATURAL ALUMINIUM COLOUR ONLY.||Billet Exhaust Anti-Vibration Mount for TM Racing Machines - Replaces OEM 'cast' part, No 21094 that was previously billet also.
Laser-cut from billet aluminium, to increase durability and increase strength over the now stock, cast alloy, anti-vibration mount - TM Part No' 21094.
A small but effective upgrade to a vital component that will still 'bend' / 'give' in an extreme pipe impact. Each mount comes ready to fit with a damping rubber and centre top-hat.
Part No' TMUK-REP:21094
||Footrest Lowering Kit: 35mm drop
Fits the 2013> TM Racing 85 mx Junior machine (its intended purpose) but also fits all adult sized machines from 2008>2021 with the '00620' footrest mountings.
Kit consists of a left and right hand mountings, new rear brake pedal adjustment bolt (85cc), new return spring and a new gear lever with the correct bend position.||Meca System Aluminium Sump Guards for TM Racing 2-Stroke and 4-Stroke Machines With Aluminium Chassis'.
Cut, profiled and shaped for a tailored fit suited to each specific model. Giving increased protection to the vital areas of the sump, chassis rails and ignition / clutch cover.
Available for the following models.
T-2288 : 125cc / 144cc - 2011 >2021
T-2289 : 250cc / 300cc - 2011>2018
T-2210 : 250cc / 300cc - 2019>2021
T-2439 : 250F - 08>09 450Fi / 530Fi - 2008>2014
T-2438 : 250Fi - 2010>2014
T-2463 : 250Fi / 300Fi - 2015>2021||TM Racing Supermotard 'Stubby' Footrests for aluminium framed machines from 2008>2021
Extra grippy studded footrests, CNC machined in a shorter length designed for extreme corners angles found in supermotard allowing for greater ground clearance.
TM Part No' F73458 / F73459