Content | Raptor Titanium. Xtreme 'Apex' Footrests for TM Racing machines.
The latest generation of the legendary, British made, Raptor Titanium footrest.
Super strong. Crafted by British engineers using hand-fabricated, aerospace-grade titanium and the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion.
Ultra light-weight.
Maximum grip tooth design, wider platform offering a greater surface area.
Anti-clog design to resist mud clogging and build-up.
Hand-fabricated in the UK by Raptor Titanium.
Set of compatible stainless steel springs included.
Designed to fit TM Racing models:
All adult machines 2008>2021
All Junior Machines (85cc / 100cc / 112cc) 2013>
RAPTOR:RX009
| SAM Racing Parts: Spoke Protection Ring.
A simple, yet ingenious solution to help reduce the problems associated with a dislodged drive chain coming inboard of the wheel, a problem that can cause severe damage to the rear wheel spokes, wheel hub, and in worst cases, the engine castings / engine internals if the chain becomes jammed around the front sprocket due to the instant 'slack' in the drive chain itself. This nylon machined ring simply fits behind the rear drive sprocket and is held in place by light friction, utilising the tapering of the spokes alongside the tapered machining of protection ring, designed to ensure that the protection ring sits snug and secure between the sprocket and spokes.
A 'must have' part for Enduro / Extreme type competition, where damage to the rear chain-guide can easily force a drive chain to derail causing damage, to not only the rear wheel but also possibly the engine casings, ending your event and ensuring a costly repair bill. The derailed drive chain will simply drop onto the protection ring and rotate around it, allowing the lack of forward drive to be noticed by the rider, hopefully before any significant damage occurs. Without the protection ring, this type of derailment of the drive chain would have severely damaged many of the spokes instantly. As used by the TM Racing Factory Teams.
Part No' SAM-SPKPROTR-397 | TM Racing genuine Start Device for the Junior 2013> Models with Formula Forks
CNC machined from billet aluminium and finished in gunmetal.
Comes with all fittings and attachments, including a new rubber cap for the fork guard button
TM Part No': 72163 | JEMX Fuel Cap for TM Racing 4-Stroke Machines from 2015>
A billet machined aluminium fuel cap, with a larger 'finger' surface area, designed to facilitate easier removal and refitting.
Comes complete with o'ring seal. For all 2015> TM Racing 4-Stroke machines with the 'under-seat' fuel tank arrangement.
Available in red, featuring the JemX logo. | TM Racing Supermotard 'Stubby' Footrests for aluminium framed machines from 2008>2021
Extra grippy studded footrests, CNC machined in a shorter length designed for extreme corners angles found in supermotard allowing for greater ground clearance.
TM Part No' F73458 / F73459
| SAM Racing Parts Caliper Holder, fits all 2015> Adult / full sized machines.
This CNC machined caliper holder is designed to hold the caliper in place, on its location perch, during rear wheel removal and re-fitting. An especially useful addition on endurance type events where quick wheel changes are paramount and time wasted trying to re-locate the caliper could be costly. This part replaces the removal axle block. Used by the TM Racing Factory Teams.
Supplied with fitting bolt.
Part No' SAM-CALHOL-15>-393 |