Content | TM Racing genuine ignition gaskets for 4-Strokes.
Ignition gaskets for all 4-Stroke models and years.
Available for 250cc / 250Fi / 400cc / 450cc / 450Fi / 530cc / 660cc machines.
F05813 - 2000>2003 - All MX Models
F05814 - 2003 - All Electric Start Models
F05823 - 2004> - All Electric Start Models
F05824 - 2004> - All MX Models
F05829 - 2010> - All 250Fi Electric Start Models.
F05832 - 2010> - All 250Fi MX Models | TM Racing hydraulic clutch slave cylinder o'rings.
Slave cylinder o'rings for all models with an hydraulically operated clutch.
Please Note: check manuals as some 250cc / 300cc 2-Strokes and 4-strokes machines require two o'rings on their slave cylinder pistons.
Part No; 12259 (Updates to Part No': 12258) - All models 2T / 4T unless stated otherwise
Part No; 12268 - 2T 250cc/300cc. 2019>
Part No 12254 - slave to casing 'seal'.
Part No 12091 - slave to casing 'seal'. | TM Racing genuine clutch case gaskets.
Clutch case gaskets for all 2-Stroke models and years.
05511 - 80cc / 85cc /100cc >2004 125cc >2000
05517 - 80cc / 85cc / 100cc - 2005>2006 125cc - 2001>2005
05527 - 125cc / 144cc - 2006>
05271 - 250cc / 300cc - >2014
05282 - 250cc / 300cc - 2015>2018
05283 - 250cc / 300cc - 2019
05285 - 250cc / 300cc - 2020>
Please choose the correct part from the required field below. | TM Racing genuine powervalve gaskets.
Powervalve gaskets for all 2-Stroke models and years.
05514 - 80cc / 85cc / 100cc - >2001
05514.1 -85cc / 100cc - 2002>
05515 - 125cc - >2000
05524 - 125cc - 2001>
05529 - 144cc - 2007>
05258 - 250cc / 300cc - All
Please choose the correct gasket for your machine from the required field below. | TM Racing suspension and linkage o'rings.
The 'full set' compromises of 10 x smaller o'rings, 2 x large o'rings and 2 2 x shock bearing o'rings.
This set will service all pivots points on the linkage components, swing-arm and shock absorber - 12102 x 10, 12010 x 2, F12312 x 2, 12058 x 2
Will cover all full-size TM Racing models and Junior models
Also available is a set of 4 x 12102 o'rings for the swing-arm pivot only. | TM Racing genuine base gaskets for 4-Strokes. Base gaskets for all 4-Stroke models and years.
Available for 250cc / 250Fi / 400cc / 450cc / 450Fi / 530cc / 660cc machines in thicknesses of 0.3mm, 0.4mm, 0.5mm and 0.6mm.
Note: some 4-Stroke machines may require more than one base gasket to achieve the required cylinder height.
Early 2000>2003 model 250/400 machines original paper base gaskets have been now superseded with the 'F05815' range and once again with the F05843 range. Please note changes to codes relating to thickness of base gaskets F05815 in relation to F05843.
All models 250F - 400F - 450F/Fi - 530F/Fi - 600F - 660F (Not 250Fi / 300Fi )
F05843.1 (F05815.1) - (0.3mm) - F05843.2 (F05815.2) - (0.4mm)- F05843.3 (F05815.3) - (0.5mm) - F05843.4 (F05185.4) - (0.6mm) -
All 250Fi / 300Fi Models - 'single pipe' :
F05837.1 (0.3mm) - F05837.2 (0.4mm) - F05837.3 (0.5mm) - F05837.4 (0.6mm)
All 250 Fi / 300Fi 'twin pipe' :
F05856.1 (0.3mm) - F05856.2 (0.4mm) - F05856.3 (0.5mm) - F05856.4 (0.6mm)
|