Content | BZERK seat support available for TM Racing 2-Stroke (125cc/144cc/250cc/300cc) models from 2015>2021 featuring the 'Fresh-Air' Intake System.
This seat support bracket rivets to the original plastic seat base (seat cover removed first) to strengthen and support the seat, to reduce 'compression' of the seat itself and the resulting 'widening' of the seat on the corner areas.
The BZERK seat support has been designed to reduce the flex in the seat base under certain loads, loads that can deform the shape and structure of the seat. The deformation of the seat base - where the 'Fresh-Air' intake system channel resides on the 2-stroke - can allow the sides of the seat to be exposed from the confines of the body panels. This exposure occurs where the radiator panel and side number panel area meet and the aesthetic angle is changed on the seat itself to mirror the contours of the bodywork - the seat 'widens' under deformation, thus causing snagging and damage to seat covers in the 'corner' area by boots tops and knee braces.
This seat support bracket is made from aluminium and comes with rivets for fitting. Featuring a padded support leg that disperses the loading across the fuel tank, whilst retaining full function of the 'Fresh Air' intake system, this simple yet effective part will reduce unwanted flex and deformation helping to keep your seat covers looking better, for longer.
See the images of the BZERK seat support to understand how it works.
AVAILABLE IN NATURAL ALUMINIUM COLOUR ONLY.
BZERK:SEAT-BR.2T.M15> | TM Racing Billet Machined Ignition Cover for the 450cc 4-stroke engine.
This billet machined cover gives increased strength over the stock cast casing and also allows for greater heat dissipation from the engine in this crucial area which contains the electrical generator system windings. This component is machined from a single aluminium block on a CNC machine in a process that takes over 10 hours to complete.
Fits all 450cc engine machines.
TM Part No' - F30968
| JEMX Fuel Cap for TM Racing 4-Stroke Machines from 2015>
A billet machined aluminium fuel cap, with a larger 'finger' surface area, designed to facilitate easier removal and refitting.
Comes complete with o'ring seal. For all 2015> TM Racing 4-Stroke machines with the 'under-seat' fuel tank arrangement.
Available in red, featuring the JemX logo. | Meca System Aluminium Sump Guards for TM Racing 2-Stroke and 4-Stroke Machines With Aluminium Chassis'.
Cut, profiled and shaped for a tailored fit suited to each specific model. Giving increased protection to the vital areas of the sump, chassis rails and ignition / clutch cover.
Available for the following models.
2-Stroke:
T-2288 : 125cc / 144cc - 2011 >2021
T-2289 : 250cc / 300cc - 2011>2018
T-2210 : 250cc / 300cc - 2019>2021
4-Stroke:
T-2439 : 250F - 08>09 450Fi / 530Fi - 2008>2014
T-2438 : 250Fi - 2010>2014
T-2463 : 250Fi / 300Fi - 2015>2021 | BZERK seat support available for TM Racing 4-Stroke machines (250Fi/300Fi/450Fi/530Fi) models from 2015-2021.
This seat support bracket rivets to the original plastic seat base (seat cover removed first) to strengthen and support the seat, to reduce 'compression' of the seat itself and the resulting 'widening' of the seat on the corner areas. The 4-stroke variant does not feature a 'centre' support like the 2-stroke version, this unnecessary with the 4-stroke bike design and the air intake at the front of the chassis as the airbox is the 'support'.
The BZERK seat support has been designed to reduce the flex in the seat base under certain loads, loads that can deform the shape and structure of the seat. The deformation of the seat base that can allow the sides of the seat to be exposed from the confines of the body panels. This exposure occurs where the radiator panel and side number panel area meet and the aesthetic angle is changed on the seat itself to mirror the contours of the bodywork - the seat 'widens' under deformation, thus causing snagging and damage to seat covers in the 'corner' area by boots tops and knee braces.
This seat support bracket is made from aluminium and comes with rivets for fitting. This simple yet effective part will reduce unwanted flex and deformation helping to keep your seat covers looking better, for longer.
See the images of the BZERK seat support to understand how it works.
AVAILABLE IN NATURAL ALUMINIUM COLOUR ONLY. | TM Racing Factory Carbon Fibre Air Filter Box and Intake Cover
For 4-Stroke Fi Models from 2015>2021
This full carbon fibre structure replaces the original plastic air box and access / intake cover
Strong, lightweight, beautiful, the ultimate in pure race componentry.
As used by the TM Racing Factory Team.
TM Pat No': 51102 |