Meca System Radiator Braces For TM Moto Machines,

£90.50 – £99.50

SKU: N/A Categories: ,

Description

Meca System Radiator Braces for TM Racing Machines.

Aluminium full surround radiator braces compromising of two side plate sections, joining braces and fittings & Pre-Formed Stainless Steel for later model year machines.

 

Available for the following models.

2-Stroke:

T-1267 : 2T 125cc / 144cc / 250cc / 300cc 2-stroke.  2000>2007

T-1268 : 2T 125cc / 144cc / 250cc / 300cc. 2008>2014. (supplied flat-pack)

T-1269 : 2T 125cc / 144cc – 2015>2021 250cc / 300cc. 2015>2018. (supplied flat-pack)

T-1210 : 2T 250cc / 300cc – carburettor engine only – 2019>2021.   NOTE: Does not fit 250cc/300cc Fi – Fuel injected 2020>. (supplied flat-pack)

T-1264 : 2T 250cc Fi/300cc Fi  – (fuel injected 2 stroke) – 2019>2021.  Machine profiled and pre-shaped from stainless steel – see image gallery (can ship by courier only due to dimensions)

T-1206 : 2T 125cc/144cc/ 250cc/300cc – Fi & Carb – 2022>. Machine profiled and pre-shaped from stainless steel – see image gallery (can ship by courier only due to dimensions)

 

4-Stroke:

T-1424 : 4T 250F carburettor model – 2008>2009

T-1438 : 4T 250Fi – 2010>2014

T-1419 :4T 250Fi / 300Fi – 2015>2020 Single Pipe Engine (supplied flat-pack)

T-1420 : 4T 250Fi / 300Fi – 2018>2021 Twin Pipe Engine (supplied flat pack)

T-1411 : 4T  250Fi/300Fi. 2022>. Machine profiled and pre-shaped from stainless steel – see image gallery (can ship by courier only due to dimensions)

 

Additional information

meca-system

, , , , , , , , , , , ,

Quick Comparison

SettingsMeca System Radiator Braces For TM Moto Machines, removeTM Racing Billet Machined Clutch Cover - 450Fi removeSAM Racing Parts: Caliper Holder - 2015> Full Sized Machines. removeFootrest Dirt-Deflectors For TM Racing Models 2008>2021 removeTM Racing Holsehot Device For Junior Machines removeTM Racing Genuine Holeshot Device For Marzocchi / KYB Forks remove
NameMeca System Radiator Braces For TM Moto Machines, removeTM Racing Billet Machined Clutch Cover - 450Fi removeSAM Racing Parts: Caliper Holder - 2015> Full Sized Machines. removeFootrest Dirt-Deflectors For TM Racing Models 2008>2021 removeTM Racing Holsehot Device For Junior Machines removeTM Racing Genuine Holeshot Device For Marzocchi / KYB Forks remove
Image
SKUF30967SAM-CALHOL-15>-393LM Footrest Dirt-Deflector Kit7216372111
Rating
Price£90.50 – £99.50£695.95£45.95 £16.00£69.95£98.95
Stock

1 in stock

Availability1 in stock
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionTM Racing Billet Machined Clutch Cover for the 450cc 4-stroke engine.
ContentMeca System Radiator Braces for TM Racing Machines. Aluminium full surround radiator braces compromising of two side plate sections, joining braces and fittings & Pre-Formed Stainless Steel for later model year machines.   Available for the following models. 2-Stroke: T-1267 : 2T 125cc / 144cc / 250cc / 300cc 2-stroke.  2000>2007 T-1268 : 2T 125cc / 144cc / 250cc / 300cc. 2008>2014. (supplied flat-pack) T-1269 : 2T 125cc / 144cc - 2015>2021 250cc / 300cc. 2015>2018. (supplied flat-pack) T-1210 : 2T 250cc / 300cc - carburettor engine only - 2019>2021.   NOTE: Does not fit 250cc/300cc Fi - Fuel injected 2020>. (supplied flat-pack) T-1264 : 2T 250cc Fi/300cc Fi  - (fuel injected 2 stroke) - 2019>2021.  Machine profiled and pre-shaped from stainless steel - see image gallery (can ship by courier only due to dimensions) T-1206 : 2T 125cc/144cc/ 250cc/300cc - Fi & Carb - 2022>. Machine profiled and pre-shaped from stainless steel - see image gallery (can ship by courier only due to dimensions)   4-Stroke: T-1424 : 4T 250F carburettor model - 2008>2009 T-1438 : 4T 250Fi - 2010>2014 T-1419 :4T 250Fi / 300Fi - 2015>2020 Single Pipe Engine (supplied flat-pack) T-1420 : 4T 250Fi / 300Fi - 2018>2021 Twin Pipe Engine (supplied flat pack) T-1411 : 4T  250Fi/300Fi. 2022>. Machine profiled and pre-shaped from stainless steel - see image gallery (can ship by courier only due to dimensions)  TM Racing Billet Machined Clutch Cover for the 450Fi 4-stroke engines. This billet machined finned cover gives increased strength over the stock cast casing and allows for greater heat dissipation and with the internal oil channel increases the centre lubrication on the clutch plate system. This component is machined from a single aluminium block on a CNC machine in a process that takes over 10 hours to complete. TM Part No' - F30967 - 450cc    SAM Racing Parts Caliper Holder, fits all 2015> Adult / full sized machines. This CNC machined caliper holder is designed to hold the caliper in place, on its location perch, during rear wheel removal and re-fitting. An especially useful addition on endurance type events where quick wheel changes are paramount and time wasted trying to re-locate the caliper could be costly. This part replaces the removal axle block. Used by the TM Racing Factory Teams. Supplied with fitting bolt. Part No' SAM-CALHOL-15>-393Footrest Dirt-Deflectors for TM Racing Models 2008>2021 . Designed by TM UK's long-standing Enduro rider, Josh Gotts and produced by Lasermaster, these dirt-deflectors are laser-cut from stainless steel to ensure the best longevity. This simple, yet effective product is designed to reduce the chances of dirt and small stones being forced into the space left by a lifting footrest, for example, when laying the bike into a turn where the footrest could be pushed upwards, thus leaving itself exposed to the ingress of mud and small stones that could jam the footrest in the upper position and hinder it return to the resting position. These dirt-deflectors not only reduce the chance of a footrest sticking, but also keep the footrest open to allow other particles to escape and keep the workings visible for lubrication and maintenance, something 'enclosed' gators do not allow. The dirt-deflectors are designed to fit behind the original footrest mountings that are found on all aluminium frame models 2008 to 2021. Sold as a pair of dirt-deflectors along with a set of 4 (2 + 2) mounting bolts for the footrest brackets. Fitting instruction supplied.TM Racing genuine Start Device for the  Junior 2013> Models with Formula Forks   CNC machined from billet aluminium and finished in gunmetal. Comes with all fittings and attachments, including a new rubber cap for the fork guard button   TM Part No': 72163TM Racing genuine Start Device for KYB 48mm and Marzocchi 50mm forks. Lift Control device for forks fitted to TM Racing machines, CNC machined from billet aluminium and colour finished. Comes with fork leg engagement ring, fork guard spring-loaded lock/return button, a set of fork guard 'strengthening' plates and all fittings. TM Part No': 72111
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
meca-system

, , , , , , , , , , , ,

Related products