Content | TM Racing Factory Carbon Fibre Combined Sub-Frame & Fuel Tank
For 4-Stroke Fi Models from 2015>2021
This full carbon fibre structure combines the fuel tank and sub-frame into one piece.
Strong, lightweight, beautiful, the ultimate in pure race componentry.
As used by the TM Racing Factory Team.
TM Part No': 55103 | TM Racing Billet Machined Clutch Cover for the 250Fi / 300F i 4-stroke engines.
This billet machined finned cover gives increased strength over the stock cast casing and allows for greater heat dissipation and with the internal oil channel increases the centre lubrication on the clutch plate system. This component is machined from a single aluminium block on a CNC machine in a process that takes over 10 hours to complete.
TM Part No' - F30035
| JEMX Fuel Cap for TM Racing 4-Stroke Machines from 2015>
A billet machined aluminium fuel cap, with a larger 'finger' surface area, designed to facilitate easier removal and refitting.
Comes complete with o'ring seal. For all 2015> TM Racing 4-Stroke machines with the 'under-seat' fuel tank arrangement.
Available in red, featuring the JemX logo. | TM Racing genuine Start Device for the Junior 2013> Models with Formula Forks
CNC machined from billet aluminium and finished in gunmetal.
Comes with all fittings and attachments, including a new rubber cap for the fork guard button
TM Part No': 72163 | BZERK seat support available for TM Racing 2-Stroke (125cc/144cc/250cc/300cc) models from 2015>2021 featuring the 'Fresh-Air' Intake System.
This seat support bracket rivets to the original plastic seat base (seat cover removed first) to strengthen and support the seat, to reduce 'compression' of the seat itself and the resulting 'widening' of the seat on the corner areas.
The BZERK seat support has been designed to reduce the flex in the seat base under certain loads, loads that can deform the shape and structure of the seat. The deformation of the seat base - where the 'Fresh-Air' intake system channel resides on the 2-stroke - can allow the sides of the seat to be exposed from the confines of the body panels. This exposure occurs where the radiator panel and side number panel area meet and the aesthetic angle is changed on the seat itself to mirror the contours of the bodywork - the seat 'widens' under deformation, thus causing snagging and damage to seat covers in the 'corner' area by boots tops and knee braces.
This seat support bracket is made from aluminium and comes with rivets for fitting. Featuring a padded support leg that disperses the loading across the fuel tank, whilst retaining full function of the 'Fresh Air' intake system, this simple yet effective part will reduce unwanted flex and deformation helping to keep your seat covers looking better, for longer.
See the images of the BZERK seat support to understand how it works.
AVAILABLE IN NATURAL ALUMINIUM COLOUR ONLY.
BZERK:SEAT-BR.2T.M15> | SAM Racing Parts Caliper Holder, fits all 2015> Adult / full sized machines.
This CNC machined caliper holder is designed to hold the caliper in place, on its location perch, during rear wheel removal and re-fitting. An especially useful addition on endurance type events where quick wheel changes are paramount and time wasted trying to re-locate the caliper could be costly. This part replaces the removal axle block. Used by the TM Racing Factory Teams.
Supplied with fitting bolt.
Part No' SAM-CALHOL-15>-393 |