Content | TM Racing Top-End Service Kit for 144cc models 2013 - With 'Red Band' Powervalve Cables.
(stock image)
All Genuine TM Racing Original Parts.
Kit consists of:
1 x 10023 - piston kit
1 x 19034 - small end
1 x 12003.1 - o'ring (updated o'ring)
1 x 12021 - o'ring
4 x base gasket: 0.2mm / 0.3mm / 0.4mm / 0.5mm
1 x 64038.1 - power-valve cable ('red' band) | TM Racing genuine 100cc piston kit.
Kit compromises of Piston, Ring, Gudgeon Pin and Circlips.
(NOTE: This piston must be fitted using the small end bearing - TM Racing Part No' 19030. Not included.)
TM Part No':
10410
10411 | TM Racing Piston Circlip Set 4-stroke
2 x piston cirCLip for 450cc piston requiring part number F09377 | TM Racing genuine 2-Stroke Con-Rods kits and Big-End Sets. OEM Con-Rod Kits and Big-End Sets for TM Racing 2-strokes.
Con-Rods kits come complete with: Con-Rod, Needle cage bearing, Crank pin and Thrust Washers.
18104 - 80cc/85cc/100cc : 1991>2012 ('unfinished look bronze coloured rod - now superseded by 18104.13)
18104.13 - 85cc/100cc : 2013> ('machined' look silver/grey coloured rod)
18147 - 112cc : 2021>
18069 (replaces 18067) - 125cc : 1993>2007 ('unfinished' look bronze coloured rod)
18080 - 125cc : 2006>2014 ('machined' look silver/grey coloured rod)
18125.2 - 125cc : 2015> ('machined' look silver/grey coloured rod)
18145 - 144cc : 2007> ('machined' look silver/grey coloured rod)
18246 - 250cc/300cc : 2005> ('unfinished' look bronze coloured rod)
18249 - 250cc/300cc : 1994>2004 ('unfinished' look bronze coloured rod)
Big-End Sets are available for the 'machined' look silver/grey Con-Rods that are classed as 'serviceable' items. These will allow the con-rod to be re-used provided it is between service limits and has not been damaged. An ideal way of preventing failure by allowing you to change the vital components of the con-rod kit prior to any problem or bearing/cage failure occurring. Big-End Sets include the silver needle cage bearing assembly, the crank pin and thrust washers. Available for the following Con-Rods :
Big-End Service Set: (17003 / 18022 / 2 x 18023) 85cc / 100cc Engines 1998> (Con-Rod kit designation 18104.13 - supercedes '18104')
Big-End Service Set: (17074 / 18079 / 2 x 18248) - 125cc Engines 2006>2014 (Con Rod Kit Designation 18080) & 144cc Engines 2007> 17074 replaces 17072 variants (Con-Rod kit designation 18145)
Big-End Service Set: (17015 / 18025 / 2 x 18239) - 125cc Engines 2015> (Con-Rod kit designation 18125.2)
Big-End Service Set: (17020 / 18271 / 2 x 18061) - 112cc Engines 2021> (Con-Rod kit desingation 18147) | TM Racing genuine powervalve control arm clip/pivot
Clip/pivot pin for all models and years.
TM Part No' 49042 | TM Racing genuine piston rings for all capacity TM Racing 2-Stroke machines.
Please Note: There are differing piston ring options available for certain models dependent upon the piston manufacturer, please ensure you order the correct ring for your piston.
11090 - 80cc Dykes ring.
11093 - 85cc Dykes ring.
11060 - 100cc
11053 - 125cc
11056 - 125cc - 1.0mm thick.
11063 - 125cc 0.8mm thick - single ring piston.
11069 - 125cc 0.8mm thick - for twin ring piston (2 required)
11012 - 144cc (For TM Piston Part No' 10145.)
11065 - 144cc (For TM Piston Part No' 10144.)
11251 - 250cc - Asso Werke
11050 - 300cc Vertex
11057 - 300cc Asso Werke
Please note piston designation, ie Piston Part number to ensure the correct ting is chosen All 80cc and 85cc Pistons come with a 'Dykes' type piston ring, these are L-shaped piston rings that are more expensive than a conventional 'flat' ring. |