Description
Meca System: Aluminium Rear Brake Master Cylinder Guard.
Protection for the vital rear-brake master cylinder.
Will fit all adult models with aluminium chassis from 2008 onwards
Part Number: T-8006
Meca System: Aluminium Rear Brake Master Cylinder Guard.
Protection for the vital rear-brake master cylinder.
Will fit all adult models with aluminium chassis from 2008 onwards
Part Number: T-8006
Settings | Meca System: Aluminium Rear Brake Master Cylinder Guard. remove | TM Racing Factory Carbon Fibre Air Filter Box and Intake Cover remove | TM Racing Carbon Fibre Airboot Insert 2015>2021 remove | TM Racing Billet Machined Ignition Cover - 450cc/530cc remove | TM Racing Genuine Holeshot Device For Marzocchi / KYB Forks remove | CMT Carbon Fibre Pipe Guard 250cc / 300cc 2015>2018 remove |
---|---|---|---|---|---|---|
Name | Meca System: Aluminium Rear Brake Master Cylinder Guard. remove | TM Racing Factory Carbon Fibre Air Filter Box and Intake Cover remove | TM Racing Carbon Fibre Airboot Insert 2015>2021 remove | TM Racing Billet Machined Ignition Cover - 450cc/530cc remove | TM Racing Genuine Holeshot Device For Marzocchi / KYB Forks remove | CMT Carbon Fibre Pipe Guard 250cc / 300cc 2015>2018 remove |
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
SKU | MECA: T-8006 | 51102 - TM M.15>21. carbon box/cover Fi | 55104 | F30968 | 72111 | CMT-505:250/300:15>18 |
Rating | ||||||
Price | £55.00 | £1,389.95 | £149.95 | £695.95 | £98.95 | £95.00 |
Stock | Out of stock | 1 in stock (can be backordered) | 1 in stock | |||
Availability | Out of stock | 1 in stock (can be backordered) | 1 in stock | |||
Add to cart | ||||||
Description | ||||||
Content | Meca System: Aluminium Rear Brake Master Cylinder Guard. Protection for the vital rear-brake master cylinder. Will fit all adult models with aluminium chassis from 2008 onwards Part Number: T-8006 | TM Racing Factory Carbon Fibre Air Filter Box and Intake Cover For 4-Stroke Fi Models from 2015>2021 This full carbon fibre structure replaces the original plastic air box and access / intake cover Strong, lightweight, beautiful, the ultimate in pure race componentry. As used by the TM Racing Factory Team. TM Pat No': 51102 | TM Racing Carbon Fibre Airboot Insert. The TM Racing Carbon Fibre Airboot Insert is designed to add rigidity to the flexible airboot between the airbox and the carburettor. Shaped to the exact contours of the airboot itself, this carbon insert increases rigidity to ensure that when maximum engine loading is being applied, alongside higher temperatures that may 'soften' the rubber, the airboot does not deform under vacuum and actually reduce the volume of air available to the carburettor. The carbon insert will therefore allow the engine to produce greater performance under the largest loads, maximising available power. To fit the carbon insert the airbox / airboot assembly will have to be removed from the sub-frame and disassembled. Fitting the carbon insert into the airboot will require patience and care due to the fine and intricate construction of the carbon fibre insert. Importantly, the airboot will have to be re-sealed to the air-filter mounting plate, therefore you must ensure you clean all mating faces and remove any existing sealant before the refitting and re-assembly procedure can begin. Please note that after fitting the carbon insert that carburettor removal / refitting will be more complex as the flexibility of the airboot - that previously aided removal / refitting - will be reduced. Do not 'force' fit the carburettor as you may damage the carbon insert. It is advised that to remove / refit the carburettor the sub-frame should be loosened and lifted slightly to give greater clearance. Fits 125cc / 144cc / 250cc / 300cc carburettor models from 2015>2021 ( all models with the 66022.15 airboot ) TM Part No' 55104 | TM Racing Billet Machined Ignition Cover for the 450cc 4-stroke engine. This billet machined cover gives increased strength over the stock cast casing and also allows for greater heat dissipation from the engine in this crucial area which contains the electrical generator system windings. This component is machined from a single aluminium block on a CNC machine in a process that takes over 10 hours to complete. Fits all 450cc engine machines. TM Part No' - F30968 | TM Racing genuine Start Device for KYB 48mm and Marzocchi 50mm forks. Lift Control device for forks fitted to TM Racing machines, CNC machined from billet aluminium and colour finished. Comes with fork leg engagement ring, fork guard spring-loaded lock/return button, a set of fork guard 'strengthening' plates and all fittings. TM Part No': 72111 | CMT / Virus - TM Racing Carbon Fibre 250cc / 300cc 2-Stroke Pipe Guard : 2015>2018 Carbon Fibre expansion chamber guards for TM Racing 2-stroke models. 250cc / 300cc: 2015>2018 |
Weight | N/A | N/A | N/A | N/A | N/A | N/A |
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
Additional information |