Sam Racing Parts: ‘Shark Fin’ Disc Protector. 2005>

£99.50

4 in stock

4 in stock

Description

Sam Racing Parts ‘Shark Fin’ Disc Protector.

Machined from billet aluminium and anodised in blue. This 10mm thick rear brake disc protector is designed to fit and secure itself to the rear caliper unit, making the fitting process quick and easy, comes with fitting hardware.

Fits all adult models 2005>. Nissin Rear Caliper.

Part No’ SAM-SHARKF.B.05>-391

Quick Comparison

SettingsSam Racing Parts: 'Shark Fin' Disc Protector. 2005> removeTM Racing Billet Machined Clutch Cover 250Fi / 300Fi removeJEMX Billet Fuel Cap 4-Stroke 2015> Models - Red Only removeFootrest Dirt-Deflectors For TM Racing Models 2008>2021 removeTM Racing Genuine Holeshot Device For Marzocchi / KYB Forks removeTM Racing Holsehot Device For Junior Machines remove
NameSam Racing Parts: 'Shark Fin' Disc Protector. 2005> removeTM Racing Billet Machined Clutch Cover 250Fi / 300Fi removeJEMX Billet Fuel Cap 4-Stroke 2015> Models - Red Only removeFootrest Dirt-Deflectors For TM Racing Models 2008>2021 removeTM Racing Genuine Holeshot Device For Marzocchi / KYB Forks removeTM Racing Holsehot Device For Junior Machines remove
Image
SKUSAM-SHARKF.B.15>-391F30035JEMX4TM.15.FUELCAP-REDLM Footrest Dirt-Deflector Kit7211172163
Rating
Price £99.50£695.00 £18.00 £16.00£98.95£69.95
Stock

4 in stock

1 in stock

1 in stock

Availability4 in stock1 in stock1 in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentSam Racing Parts 'Shark Fin' Disc Protector. Machined from billet aluminium and anodised in blue. This 10mm thick rear brake disc protector is designed to fit and secure itself to the rear caliper unit, making the fitting process quick and easy, comes with fitting hardware. Fits all adult models 2005>. Nissin Rear Caliper. Part No' SAM-SHARKF.B.05>-391TM Racing Billet Machined Clutch Cover for the 250Fi / 300F i 4-stroke engines. This billet machined finned cover gives increased strength over the stock cast casing and allows for greater heat dissipation and with the internal oil channel increases the centre lubrication on the clutch plate system. This component is machined from a single aluminium block on a CNC machine in a process that takes over 10 hours to complete. TM Part No' - F30035  JEMX Fuel Cap for TM Racing 4-Stroke Machines from 2015> A billet machined aluminium fuel cap, with a larger  'finger' surface area, designed to facilitate easier removal and refitting. Comes complete with o'ring seal. For all 2015> TM Racing 4-Stroke machines with the 'under-seat' fuel tank arrangement. Available in red, featuring the JemX logo.Footrest Dirt-Deflectors for TM Racing Models 2008>2021 . Designed by TM UK's long-standing Enduro rider, Josh Gotts and produced by Lasermaster, these dirt-deflectors are laser-cut from stainless steel to ensure the best longevity. This simple, yet effective product is designed to reduce the chances of dirt and small stones being forced into the space left by a lifting footrest, for example, when laying the bike into a turn where the footrest could be pushed upwards, thus leaving itself exposed to the ingress of mud and small stones that could jam the footrest in the upper position and hinder it return to the resting position. These dirt-deflectors not only reduce the chance of a footrest sticking, but also keep the footrest open to allow other particles to escape and keep the workings visible for lubrication and maintenance, something 'enclosed' gators do not allow. The dirt-deflectors are designed to fit behind the original footrest mountings that are found on all aluminium frame models 2008 to 2021. Sold as a pair of dirt-deflectors along with a set of 4 (2 + 2) mounting bolts for the footrest brackets. Fitting instruction supplied.TM Racing genuine Start Device for KYB 48mm and Marzocchi 50mm forks. Lift Control device for forks fitted to TM Racing machines, CNC machined from billet aluminium and colour finished. Comes with fork leg engagement ring, fork guard spring-loaded lock/return button, a set of fork guard 'strengthening' plates and all fittings. TM Part No': 72111TM Racing genuine Start Device for the  Junior 2013> Models with Formula Forks   CNC machined from billet aluminium and finished in gunmetal. Comes with all fittings and attachments, including a new rubber cap for the fork guard button   TM Part No': 72163
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
colour

,