|Content||SAM Racing Parts: CNC TM Racing Fuel Cap.
Fits all models that feature the 'Acerbis' type fuel cap. 2-stroke & 4-stroke models from 1997>2007 2-stroke models 2015>
CNC machined from billet aluminium and anodised in blue.
Part No. SAM-FLCAPBLU.99-07/15>-409||Meca System Aluminium Sump Guards for TM Racing 2-Stroke and 4-Stroke Machines With Aluminium Chassis'.
Cut, profiled and shaped for a tailored fit suited to each specific model. Giving increased protection to the vital areas of the sump, chassis rails and ignition / clutch cover.
Available for the following models.
T-2288 : 125cc / 144cc - 2011 >2021
T-2289 : 250cc / 300cc - 2011>2018
T-2210 : 250cc / 300cc - 2019>2021
T-2439 : 250F - 08>09 450Fi / 530Fi - 2008>2014
T-2438 : 250Fi - 2010>2014
T-2463 : 250Fi / 300Fi - 2015>2021||TM Racing Billet Machined Clutch Cover for the 450Fi 4-stroke engines.
This billet machined finned cover gives increased strength over the stock cast casing and allows for greater heat dissipation and with the internal oil channel increases the centre lubrication on the clutch plate system. This component is machined from a single aluminium block on a CNC machine in a process that takes over 10 hours to complete.
TM Part No' - F30967 - 450cc
||BZERK seat support available for TM Racing 2-Stroke (125cc/144cc/250cc/300cc) models from 2015>2021 featuring the 'Fresh-Air' Intake System.
This seat support bracket rivets to the original plastic seat base (seat cover removed first) to strengthen and support the seat, to reduce 'compression' of the seat itself and the resulting 'widening' of the seat on the corner areas.
The BZERK seat support has been designed to reduce the flex in the seat base under certain loads, loads that can deform the shape and structure of the seat. The deformation of the seat base - where the 'Fresh-Air' intake system channel resides on the 2-stroke - can allow the sides of the seat to be exposed from the confines of the body panels. This exposure occurs where the radiator panel and side number panel area meet and the aesthetic angle is changed on the seat itself to mirror the contours of the bodywork - the seat 'widens' under deformation, thus causing snagging and damage to seat covers in the 'corner' area by boots tops and knee braces.
This seat support bracket is made from aluminium and comes with rivets for fitting. Featuring a padded support leg that disperses the loading across the fuel tank, whilst retaining full function of the 'Fresh Air' intake system, this simple yet effective part will reduce unwanted flex and deformation helping to keep your seat covers looking better, for longer.
See the images of the BZERK seat support to understand how it works.
AVAILABLE IN NATURAL ALUMINIUM COLOUR ONLY.
BZERK:SEAT-BR.2T.M15>||Footrest Dirt-Deflectors for TM Racing Models 2008>2021 .
Designed by TM UK's long-standing Enduro rider, Josh Gotts and produced by Lasermaster, these dirt-deflectors are laser-cut from stainless steel to ensure the best longevity.
This simple, yet effective product is designed to reduce the chances of dirt and small stones being forced into the space left by a lifting footrest, for example, when laying the bike into a turn where the footrest could be pushed upwards, thus leaving itself exposed to the ingress of mud and small stones that could jam the footrest in the upper position and hinder it return to the resting position. These dirt-deflectors not only reduce the chance of a footrest sticking, but also keep the footrest open to allow other particles to escape and keep the workings visible for lubrication and maintenance, something 'enclosed' gators do not allow.
The dirt-deflectors are designed to fit behind the original footrest mountings that are found on all aluminium frame models 2008 to 2021.
Sold as a pair of dirt-deflectors along with a set of 4 (2 + 2) mounting bolts for the footrest brackets. Fitting instruction supplied.||Raptor Titanium. Xtreme 'Apex' Footrests for TM Racing machines.
The latest generation of the legendary, British made, Raptor Titanium footrest.
Super strong. Crafted by British engineers using hand-fabricated, aerospace-grade titanium and the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion.
Maximum grip tooth design, wider platform offering a greater surface area.
Anti-clog design to resist mud clogging and build-up.
Hand-fabricated in the UK by Raptor Titanium.
Set of compatible stainless steel springs included.
Designed to fit TM Racing models:
All adult machines 2008>2021
All Junior Machines (85cc / 100cc / 112cc) 2013>